computer system is running properly but nothing is being seen on the monitor.

 computer system is running properly but nothing is being seen on the monitor.

hope friends are good. Today we will solve the problem of computer system. In the current era, almost everyone uses computers. And this is an electronic device so many times the problem will solve today. So let’s get started.

Solution:

computer System
Computer system

1 | Turn off the system and the power cable must be removed from the main system. (With caution)

2 | Remove all RAM from the memory slot.

3 | Rubbers with an eraser need to be rubbed and rub cleaned.

4 | All ram scotts need to be thoroughly cleaned with a strong brush.

5 | You need to turn on the computer without installing RAM and remember to make a beep sound.

6 | If you can hear (beep) Sound, you need to turn the computer off and install the RAM.

7 | Then if there is a beep sound then the RAM has to be understood.

8 | Again and Display does not actually need to install new RAM.

9 | Check and replace the RAM again and in most cases the reason for not displaying the RAM
If you can’t resolve it at the end, take it to the nearest service center

Recoment:

1 | Turn off the system and the power cable must be removed from the main system. (With caution)

2 | Remove all RAM from the memory slot.

3 | Rubbers with an eraser need to be rubbed and rub cleaned.

4 | All ram scotts need to be thoroughly cleaned with a strong brush.

5 | You need to turn on the computer without installing RAM and remember to make a beep sound.

6 | If you can hear (bee

Friends Hope you enjoy today’s post if you like it, please share your friends with me like and thank you for staying with my website.

visit next post

computer system

#computer system

computer system, computer system, computer system,

admin

One thought on “computer system is running properly but nothing is being seen on the monitor.

Leave a Reply

Your email address will not be published. Required fields are marked *